Pulnix TM-7EX Manual descarregar pdf (Página 33)

Cognex MVS-8100C Hardware Manual 33

Cognex MVS-8100C

Hardware

This chapter describes the Cognex MVS-8100C image acquisition board that can be

used with Cognex 8000 series software.

The MVS-8100C is a 32-bit PCI bus frame grabber that fits into a single slot in your PC.

The 8100C can:

• Acquire images from monochrome or color cameras

• Support up to four monochrome camera inputs, or up to two color camera inputs

• Transfer acquired images over the PCI bus to memory on the host PC

Table 10 summarizes the capabilities of the MVS-8100C. More detail about each feature

is provided later in this chapter.

Frame Grabber Feature Cognex MVS-8100C

Image acquisition timing

supported

RS-170, CCIR, NTSC, PAL, RGB

Acquired image size with Cognex

software

640x480 (RS-170 and NTSC)

768x570 (CCIR and PAL)

640x480 (asynchronous reset)

Acquired monochrome image

resolution

8 bits per pixel

Acquired color image resolution 24 bits per pixel

Camera input ports 2 monochrome or 1 color

4 monochrome or 2 color with expansion panel

Camera power supplied by board Yes

Source of synchronization signals From the MVS-8100C, from the currently

selected camera (in Genlock mode), or from an

external H and V drive sync source

Overlapped image acquisition and

processing

Yes

External trigger support Four high-speed optically isolated trigger

inputs

Strobe support Four high-speed open-collector strobe outputs

Output signal line Optically isolated accept/reject control

Table 10. MVS-8100C features

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 55 56

Sem comentários

Pulnix TM-7EX Manual Página 33