Pulnix TM-76 Manual de Instruções descarregar pdf (Página 14)

Page 6

Installation

TM-1020 Series Progressive Scan Shutter Cameras

dissipation. For optimal performance, PULNiX recommends using a cooling fan to set up a positive air

ﬂow around the camera and following the precautions below.

• Mount the camera on a large heat sink (camera bracket) made out of conductive material like alu-

minum.

• Make sure the ﬂow of heat from the camera case to the bracket is not blocked by a non-conductive

material like plastic.

• Make sure the camera has enough open space around it to facilitate the free ﬂow of air.

Please contact PULNiX America, Inc. at (800) 445-5444 or send an email to [email protected] if

you have any questions.

2.2.2 Connector Pin Conﬁgurations

2.2.2 (a) 12-Pin Connector (LVDS/RS-422 version)

The TM-1020 series has a 12-pin Hirose connector for power input,

serial communication, and signal integration. Pin #1 is Ground and

Pin #2 is +12V DC. Other pins handle a number of input and output

functions, as shown in Table 1 below.

TABLE 1. 12-Pin Connector (LVDS/RS-422 version)

Pin Description Pin Description

1 GND (power) 7 VD In

2 +12V DC 8 Strobe Out

3 GND (analog) 9 HD In

4 Video Out 10 RXD (RS-232)

5 GND (digital) 11 Integration Control

6 VINIT In 12 TXD (RS-232)

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 71 72

Sem comentários

Pulnix TM-76 Manual de Instruções Página 14