Pulnix TM-7EX Manual descarregar pdf (Página 16)

MVS-8100L Hardware Installation 1

16 Cognex MVS-8100L Hardware Manual

Configuring Cameras

Some of the cameras supported for use with the MVS-8100L require switch settings to

work best with Cognex software, as described in the following sections.

Configuring Sony XC-ES50 Cameras

The MVS-8100L supports the use of the Sony XC-ES50 family of cameras, including the

XC-ES50 and XC-ES50CE. If you purchase your XC-ES50 cameras from Cognex, they

arrive ready to use. If you purchase your XC-ES50 from a third party, you must configure

the camera as shown in this section.

Figure 8 shows the back panel of the Sony XC-ES50 camera with the switches in their

factory default position.

Figure 8. Sony XC-ES50 camera back panel

To configure the switches for the Sony XC-ES50 camera:

1. Configure the 10-position DIP switch as shown in Figure 8.

Note You can set switch 5 to ON in factory default mode to use field

integration rather than frame integration (single field and

half-resolution video formats only).

2. Set the manual gain switch in the fully vertical position.

3. Set the HD/VD switch to external (EXT).

4. Set the 75Ω switch to ON.

75Ω

VIDEO OUT/DC IN/SYNC

SHUT

FR/FL

TRIG

MAGC

MIN

MAX

GAIN

EXT

INT

HT/VD

OFF

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 39 40

Sem comentários

Pulnix TM-7EX Manual Página 16